phillips dect 215 free download

File name dect2151s_07_dfu_eng.pdf

Installing your telephone Inserting / Replacing battery pack / Telephone connection Warning:To insert battery pack and /or to connect your telephone, please refer to the drawings printed on the inside cover. With the help of the installation drawings : 1.- Plug the line cord (A) into the line socket on your DECT 211 or DECT 215 base station. Plug the power cable (B) into the power socket on your DECT 211 or DECT 215 base station. Plug the power supply unit into the wall socket. Connect the telephone line cord into the wall socket. 2.- Open the battery door on the handset by sliding it down. 3.- Connect the battery pack to the connector inside the handset. Place the battery pack with sticker face up and wires along the left side of the battery pack. 4.- Replace the battery door. 5.- Put the handset on the base and charge for 24 hours before use. Charging / Recharging the telephone (See battery status icon on page 4.) On first use or when inserting a new battery, charge the battery with the handset for a t least 24 hours. This ensures optimal battery life reached after 3 cycles of charge/uncharge. The battery needs to be charged if you hear a beep when using the telephone. The battery life is about 300 hours in stand-by time and 18 hours in communication. Configuring the phone for use Don't change your configuration code if you live in UK or Northern Ireland.Your product is already factory configured with the right settings. W a r n i n g :This product is O N L Y designed to be used in countries L I S T E D below. Country Northern Ireland UK Code 44 44 Warning : If you live in the country in the table below, you m u s t enter the relevant configuration code using the key sequence shown followed by your country code. Rep. of Ireland 153 For Example to configurate for Republic of Ireland : dial 153 Advice : If you have bought your product in any of the above countries but want to use it in another one, you can enter the configuration code, according to the above tables, in order to activate the right country settings. Nevertheless, you have to change the telephone line cord adapter according to the country where you want to use it. www.philips.com/faqs/dect 1 Environment & Safety Safety information : This equipment is not designed for making emergency calls when the power fails. An alternative should be made available for access to emergency calls. Power requirements : The product requires an electrical supply of 220-240 volts, single phase alternating current, excluding IT installations defined in standard EN 60-950. WARNING ! The electrical network is classified as dangerous according to criteria in the standard EN 60-950.The only way to power down this product is by unplugging the power supply from the electrical outlet. Ensure the electrical outlet is located close to the apparatus and is always easily accessible. Telephone connection : The voltage on the network is classified as TNV-3 (Telecommunication Network Voltages, as defined in the s